Mirror Cutter for Thick Glass or Thin Glass Easy to Use for Beginner Or Pro Running Pliers Built into The Glass Cutters Tool with Glass Cutting Oil Instructions and Videos on How to Cut Glass Mirror
- PREPARE MIRROR CUTTER -Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run The Wheel Up And Down A Board, The Wheel Must Be Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Drags It Will Not Work. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Drag Across Glass And That Will Not Make a Good Score. Watch All Videos on Glass Cutter and Read All Included Tips And Instructions, Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique.
- HOW TO HOLD MIRROR CUTTING TOOL -Grips On Mirror Cutter Tool Are Only For Squeezing Mirror To Break And Should Not Be Used To Hold Glass Cutter When Scoring. Hold Close To The Wheel for Better Control And Pressure To Cutting Wheel, Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line Instead Of Shallow V, that Will Not Break On The Line. The Correct Mirror Score Must Be Just Hard Enough To Leave A Score Line On The Glass Mirror.
- CUT STRAIGHT LINE IN MIRROR - You Can Draw A Straight Line On The Mirror With A Marker And Simply Follow The Line With The Mirror Glass Cutter By Pulling Towards You And Looking At The Back Of The Mirror Cutting Wheel or Use Flat Side Of Glass Mirror Cutting Blade To Run Along Very Smooth Straight Edge Guide At Least 2mm Thick. Place Mirror Sheet On Board At Waist Height So You Can Use Mirror Glass Cutter Tool Like A Professional Glass Cutter. You May Need To Tape Guide To Prevent Moving.
- CUT CURVES IN MIRROR –Wavy Lines or Curves Up To Quarter Circle Can Be Cut In Mirrors If Tool is Held Correct And Instructions Followed Closely. Draw Line On Mirror And Follow The Line With The Mirror Cutting Tool. The Mirror Cutter Must Be Held Upright And Perpendicular, If You Lean Tool Over Sideways It Will Slide And Stop Glass Cutter From Working And Not Cut The Required V Cut In The Surface Of The Mirror Glass. Smooth curves can be with the Mirror Cutting Tool Sharp Angles Are Not Possible.
- BREAKING MIRROR - With Glass Cutter Align Aluminum Breaker Dead Center Over The Score Line, Lift Mirror and Squeeze Grips Gently At End Of Handles. For Large Mirror Sheet A Straight Piece Of Wood Can Be Placed Under The Score Line And Mirror Bent Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edges, Less May Be Possible But Only With Practice.
- Color: 2.Pink Right Handed
- Manufacturer: The Amazing Tile And Glass Cutter
- Model Number: GCPK
- Package Quantity: 1
- Part Number: GCPK
- Size: A. Glass Cutter Kit
Mirror Cutting Tool Kit – Not Just Any Mirror Cutter The Amazing Glass Cutter Made In Uk A Manual Glass Mirror Cutter That Lets You Cut Straight Radius And Wavy Lines In Mirror Glass Stained Glass And Glass Tiles. The Scoring Wheel Is Not Sharp, It Is Likely The Dullest Tool You Will Own But The Hardest, This Hardness Along With The Special Angle Ground Into The Mirror Scoring Wheel Allows The Amazing Glass Cutter To Cut Thick Mirror And Cut Thin Mirror And Glass Materials And Hard Tile Without Hurting The Wheel. The Secret Is To Follow The Instructions Exactly. Practice On A Spare Piece In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Give Uneven Pressure Along The Score Line And May Even Crack The Mirror Before You Start. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely May Cause The Wheel To Bind, Drag And Even Lock Up And Just Scratch The Glass Instead Of Evenly Scoring It And This Will Prevent The Mirror Cutter From Working Correctly. Holding The Mirror Cutting Tool By The Plastic Grips When Scoring With Your Strongest Hand Means That You Are Only Applying Minimal Amount Of Pressure If Any On The Cutting Wheel At The Point Where The Scoring Is Happening. Always Pull Towards You Not Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Down Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Can Wipe The Oil Off The Glass And There Is No Score Line Visible, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.
Shipping Summary
We currently ship exclusively to addresses within the United Kingdom.
Standard International Shipping from the United States to the United Kingdom is available at a flat rate of £9.99.
Shipping Time & Methods
Estimated Delivery Time: 10–17 business days
This total includes both processing and transit times.
-
Processing Time: All orders are processed and dispatched within 1–3 business days of purchase.
-
International Transit (US to UK):
Orders are initially shipped via FedEx from our U.S.-based fulfillment centers.
Average international transit time is 4–10 business days. -
Domestic Delivery within the UK:
Once the shipment arrives in the United Kingdom, it is handed over to Royal Mail for final delivery.
UK domestic delivery typically takes an additional 3–4 business days.
Shipping times may vary depending on the product’s fulfillment center and any customs processing that may be required.
Please note that while most packages arrive within the estimated timeframe, unexpected delays may occur due to factors such as customs inspections, public holidays, weather disruptions, or other unforeseen circumstances. Delivery dates are not guaranteed, as final transportation is managed by third-party carriers.
Tracking Information
You will receive a tracking number via email once your order has been dispatched.
Products may be shipped from different fulfillment centers depending on availability and inventory levels.
Delivery Information
Orders are delivered directly to most addresses within the United Kingdom, with the exception of P.O. boxes.
In certain remote or rural areas, additional delivery fees may apply. In such cases, you may be required to collect your parcel from the nearest shipping partner’s location.
Refund & Return Policy
Overview
We want you to be satisfied with your purchase. Please review our refund and return policy to understand how to proceed if you need to return an item or request a refund.
Order Cancellations
Canceling Your Order Before Shipping:
You can cancel your order within 2 hours of placing it. To do so:
-
Log in to your account and cancel the order directly.
-
Alternatively, email us immediately at cs@everymarket.uk with your order details.
If More Than 2 Hours Have Passed:
If it's been more than 2 hours since you placed your order, you will need to contact our customer service team for assistance. Please email us at cs@everymarket.uk with your order details.
Once Your Order Has Shipped:
Unfortunately, we cannot cancel orders once they’ve been shipped. In that case, you can return the item by following our return process.
Return Policy
Return Period: You have 30 days from the date of delivery to request a return.
Item Condition: Products must be unused, unwashed, and in their original packaging with all tags attached.
Return Shipping Costs: Customers are responsible for return shipping fees unless the item is defective.
Return Approval: Returns must be approved before sending items back. Contact us at cs@everymarket.uk to begin the process.
How to Initiate a Return
-
Contact our support team at cs@everymarket.uk with your order number and reason for the return.
-
If approved, we will provide a return shipping label and detailed instructions.
-
Pack the item securely and send it back using a trackable shipping method.
-
Once received and inspected, we will process your refund or exchange.
Defective or Damaged Products
If you receive a defective, damaged, or incorrect item, please contact us immediately.
Return Eligibility: Used defective items may be returned if the defect is confirmed.
Shipping Costs: We will cover the return shipping cost for defective or incorrect items.
Refund: A full refund, including original shipping costs, will be issued for defective items.
Returns for Customer Remorse (Changed Mind, Wrong Item Ordered)
Eligibility: Items may be returned within 30 days if they are unused and in their original condition.
Shipping Costs: Customers are responsible for return shipping fees.
Refund: Original shipping costs are non-refundable for remorse-based returns.
Items Not Eligible for Return
-
Electronic devices after 30 days (e.g., laptops, tablets, Kindles)
-
Gift cards and prepaid game cards
-
Perishable goods, some jewelry, and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Process
Processing Time: Refunds are issued within 3-5 business days after we receive and inspect the returned item.
Refund Method: Refunds are credited to the original payment method or as store credit for purchases made with gift cards.
Bank Processing: Please allow additional time for your bank to process the refund.
Exchanges
To exchange an item quickly, return the original product and place a new order for the replacement.
Return Address
EveryMarket Customer Service
22 Larch End, Uckfield, TN22 5GE
Customer Support
Our support team is available 24/7 for any questions or assistance.
📧 Email: cs@everymarket.uk
- PREPARE MIRROR CUTTER -Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run The Wheel Up And Down A Board, The Wheel Must Be Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Drags It Will Not Work. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Drag Across Glass And That Will Not Make a Good Score. Watch All Videos on Glass Cutter and Read All Included Tips And Instructions, Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique.
- HOW TO HOLD MIRROR CUTTING TOOL -Grips On Mirror Cutter Tool Are Only For Squeezing Mirror To Break And Should Not Be Used To Hold Glass Cutter When Scoring. Hold Close To The Wheel for Better Control And Pressure To Cutting Wheel, Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line Instead Of Shallow V, that Will Not Break On The Line. The Correct Mirror Score Must Be Just Hard Enough To Leave A Score Line On The Glass Mirror.
- CUT STRAIGHT LINE IN MIRROR - You Can Draw A Straight Line On The Mirror With A Marker And Simply Follow The Line With The Mirror Glass Cutter By Pulling Towards You And Looking At The Back Of The Mirror Cutting Wheel or Use Flat Side Of Glass Mirror Cutting Blade To Run Along Very Smooth Straight Edge Guide At Least 2mm Thick. Place Mirror Sheet On Board At Waist Height So You Can Use Mirror Glass Cutter Tool Like A Professional Glass Cutter. You May Need To Tape Guide To Prevent Moving.
- CUT CURVES IN MIRROR –Wavy Lines or Curves Up To Quarter Circle Can Be Cut In Mirrors If Tool is Held Correct And Instructions Followed Closely. Draw Line On Mirror And Follow The Line With The Mirror Cutting Tool. The Mirror Cutter Must Be Held Upright And Perpendicular, If You Lean Tool Over Sideways It Will Slide And Stop Glass Cutter From Working And Not Cut The Required V Cut In The Surface Of The Mirror Glass. Smooth curves can be with the Mirror Cutting Tool Sharp Angles Are Not Possible.
- BREAKING MIRROR - With Glass Cutter Align Aluminum Breaker Dead Center Over The Score Line, Lift Mirror and Squeeze Grips Gently At End Of Handles. For Large Mirror Sheet A Straight Piece Of Wood Can Be Placed Under The Score Line And Mirror Bent Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edges, Less May Be Possible But Only With Practice.
- Color: 2.Pink Right Handed
- Manufacturer: The Amazing Tile And Glass Cutter
- Model Number: GCPK
- Package Quantity: 1
- Part Number: GCPK
- Size: A. Glass Cutter Kit
Mirror Cutting Tool Kit – Not Just Any Mirror Cutter The Amazing Glass Cutter Made In Uk A Manual Glass Mirror Cutter That Lets You Cut Straight Radius And Wavy Lines In Mirror Glass Stained Glass And Glass Tiles. The Scoring Wheel Is Not Sharp, It Is Likely The Dullest Tool You Will Own But The Hardest, This Hardness Along With The Special Angle Ground Into The Mirror Scoring Wheel Allows The Amazing Glass Cutter To Cut Thick Mirror And Cut Thin Mirror And Glass Materials And Hard Tile Without Hurting The Wheel. The Secret Is To Follow The Instructions Exactly. Practice On A Spare Piece In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Give Uneven Pressure Along The Score Line And May Even Crack The Mirror Before You Start. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely May Cause The Wheel To Bind, Drag And Even Lock Up And Just Scratch The Glass Instead Of Evenly Scoring It And This Will Prevent The Mirror Cutter From Working Correctly. Holding The Mirror Cutting Tool By The Plastic Grips When Scoring With Your Strongest Hand Means That You Are Only Applying Minimal Amount Of Pressure If Any On The Cutting Wheel At The Point Where The Scoring Is Happening. Always Pull Towards You Not Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Down Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Can Wipe The Oil Off The Glass And There Is No Score Line Visible, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.
Shipping Summary
We currently ship exclusively to addresses within the United Kingdom.
Standard International Shipping from the United States to the United Kingdom is available at a flat rate of £9.99.
Shipping Time & Methods
Estimated Delivery Time: 10–17 business days
This total includes both processing and transit times.
-
Processing Time: All orders are processed and dispatched within 1–3 business days of purchase.
-
International Transit (US to UK):
Orders are initially shipped via FedEx from our U.S.-based fulfillment centers.
Average international transit time is 4–10 business days. -
Domestic Delivery within the UK:
Once the shipment arrives in the United Kingdom, it is handed over to Royal Mail for final delivery.
UK domestic delivery typically takes an additional 3–4 business days.
Shipping times may vary depending on the product’s fulfillment center and any customs processing that may be required.
Please note that while most packages arrive within the estimated timeframe, unexpected delays may occur due to factors such as customs inspections, public holidays, weather disruptions, or other unforeseen circumstances. Delivery dates are not guaranteed, as final transportation is managed by third-party carriers.
Tracking Information
You will receive a tracking number via email once your order has been dispatched.
Products may be shipped from different fulfillment centers depending on availability and inventory levels.
Delivery Information
Orders are delivered directly to most addresses within the United Kingdom, with the exception of P.O. boxes.
In certain remote or rural areas, additional delivery fees may apply. In such cases, you may be required to collect your parcel from the nearest shipping partner’s location.
Refund & Return Policy
Overview
We want you to be satisfied with your purchase. Please review our refund and return policy to understand how to proceed if you need to return an item or request a refund.
Order Cancellations
Canceling Your Order Before Shipping:
You can cancel your order within 2 hours of placing it. To do so:
-
Log in to your account and cancel the order directly.
-
Alternatively, email us immediately at cs@everymarket.uk with your order details.
If More Than 2 Hours Have Passed:
If it's been more than 2 hours since you placed your order, you will need to contact our customer service team for assistance. Please email us at cs@everymarket.uk with your order details.
Once Your Order Has Shipped:
Unfortunately, we cannot cancel orders once they’ve been shipped. In that case, you can return the item by following our return process.
Return Policy
Return Period: You have 30 days from the date of delivery to request a return.
Item Condition: Products must be unused, unwashed, and in their original packaging with all tags attached.
Return Shipping Costs: Customers are responsible for return shipping fees unless the item is defective.
Return Approval: Returns must be approved before sending items back. Contact us at cs@everymarket.uk to begin the process.
How to Initiate a Return
-
Contact our support team at cs@everymarket.uk with your order number and reason for the return.
-
If approved, we will provide a return shipping label and detailed instructions.
-
Pack the item securely and send it back using a trackable shipping method.
-
Once received and inspected, we will process your refund or exchange.
Defective or Damaged Products
If you receive a defective, damaged, or incorrect item, please contact us immediately.
Return Eligibility: Used defective items may be returned if the defect is confirmed.
Shipping Costs: We will cover the return shipping cost for defective or incorrect items.
Refund: A full refund, including original shipping costs, will be issued for defective items.
Returns for Customer Remorse (Changed Mind, Wrong Item Ordered)
Eligibility: Items may be returned within 30 days if they are unused and in their original condition.
Shipping Costs: Customers are responsible for return shipping fees.
Refund: Original shipping costs are non-refundable for remorse-based returns.
Items Not Eligible for Return
-
Electronic devices after 30 days (e.g., laptops, tablets, Kindles)
-
Gift cards and prepaid game cards
-
Perishable goods, some jewelry, and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Process
Processing Time: Refunds are issued within 3-5 business days after we receive and inspect the returned item.
Refund Method: Refunds are credited to the original payment method or as store credit for purchases made with gift cards.
Bank Processing: Please allow additional time for your bank to process the refund.
Exchanges
To exchange an item quickly, return the original product and place a new order for the replacement.
Return Address
EveryMarket Customer Service
22 Larch End, Uckfield, TN22 5GE
Customer Support
Our support team is available 24/7 for any questions or assistance.
📧 Email: cs@everymarket.uk
Oops!
Sorry, it looks like some products are not available in selected quantity.